Best Welding Schools In New York [Updated]


Welding schools are the best place for those who are looking for a new career as a welder or want to improve and expand their current skills. There are many welding schools, so let’s take a closer look at them

Welding Schools In New York

in the table below I have listed relevant welding schools in New York, have a look:

Welding SchoolsContactAccredited with
Delhi State University of New York Welding Program2 Main St. Delhi, NY 13753
Phone: (607) 746-4070
pipe welding, blueprint reading and welder certifications.
Apex Technical School – NYC Welding635 Avenue of the Americas New York, NY 10011
Phone: (212)645-3300
pipe welding, blueprint reading and NYC State and City Code welder certifications.
Dutches BOCES Welding Technology5 BOCES Road • Poughkeepsie, New York 12601
Phone: (845) 486-8001
pipe welding, blueprint reading and welder certifications.
Hudson Valley Community College Technical Programs80 Vandenburgh Ave., Troy, NY 12180
Phone: (518) 629-4822
pipe welding, blueprint reading and welder certifications (AWS, NYS and DOT).
Genesee Valley Educational Partnership – Metal Trades80 Munson Street, LeRoy, NY 14482
Phone: (585) 344-7900
pipe welding, blueprint reading and welder certifications.
Mohawk Valley Community College Welding ProgramUtica Campus
1101 Sherman Drive Utica, NY 13501
Phone: (315) 792-5400
Rome Campus
1101 Floyd Ave., Rome NY 13440
Phone: 315-339-3470
pipe welding and blueprint reading.
Modern Welding School1842 State Street Schenectady, NY 12304
Phone: (518)374-1216
pipe welding, blueprint reading and welder certifications.
Oswego County B O C E S Welding Program179 County Route 64 Mexico, NY 13114
Phone: (315) 963-4251
pipe welding, blueprint reading and welder certifications.
East Greenbush Central School District29 Englewood Avenue
East Greenbush, NY 12061
United States
Facility Representative:
Steven Ford
F: 518-477-4833
No Informations
Genesee Valley Career And Tech Center8250 State Rd
Batavia, NY 14020
United States
Facility Representative:
Jon Sanfratello
No Infomations

>> Check Out All Welding Schools In New York Here…

Here are a few common questions people often have about Welding Schools in NYC:

How Long Is A Welding Course?

The duration of a welding course can vary depending on the program chosen. Completing all the classes can take about 6-8 months.

On the other hand, welding programs in a community college can last for two years, and upon graduation, students receive an associate degree. For basic welding school training, programs typically take six months to a year.

Therefore, the length of a welding course can range from several months to a couple of years, depending on the program’s type and level.

How Long Are Most Welding Trade Schools?

Each additional class for welding can take 3-4 weeks. If you are starting a career in welding, it is recommended to take at least 3 classes.

Welding trade schools can vary in length, with some programs lasting for as little as 7 months, while others can last up to 2 years. However, the length of training depends on the program chosen.

There are several training options for aspiring welders, including vocational schools, community colleges, apprenticeships, welding training programs, and on-the-job training, as mentioned earlier.

How Much Do Welders In NY Make?

Welders with certification earn 35.06% more than the average base salary, which is $34.51 per hour. The average salary for Welder I in New York is $48,677 as of May 25, 2023, with a range of $43,311 to $55,758. The estimated total pay for a Welder in the New York City area is $47,968 per year, with an average salary of $44,988 per year.

How Much Does a Rig Welder Earn In NYC?

The average annual pay for a Rig Welder job in Staten Island, NY (which is a borough of NYC) is $96,921 per year. However, it’s important to note that the salary of a welder can vary depending on factors such as location, experience, and industry.

How Do I Become a Certified Welder in NY?

How to become a certified welder in New York? To acquire your welder license in New York, there are 4 steps you have to go through. It can get quite confusing, so we will go over exactly how to do it here:

Step #1: Meet the Criteria

Before you can even begin to sit the exam, you must make sure you:

  • are at least 18 years old.
  • can read and write in English.
  • have a strong moral personality. This way, you will be fully able to perform everything required of a certified welder.

Related reading: 3 Important Skills Listed Under welder – All You Need To Know

Step #2: Sit the Exam

There are two main exam sets you can complete to obtain your license in New York. Just remember, you only have to do one of them, not both.

Let’s take a look at each one in turn so you can decide which is right for you.

The American Welding Society Manual Shielded Metal Arc Welding Process:

  • Groove and fillet welds in flat, horizontal, vertical, and overhead positions.
  • Limitless metal thicknesses.
  • 3G and 4G certificates.
  • If you are looking to weld special metals, then you need to get the corresponding certificate from the American Welding Society as well as the above ones.
  • Have to use A36 base metal.
  • You have to use metals with thicknesses of 1 inch to ⅛ inch. 

Related reading: Stick Welding – SMAW – Ultimate Guide

The New York State Department of Transportation Field Welder Certification Manual Shielded Metal Arc Welding Process:

  • 3G and 4G.
  • Horizontal, flat, vertical, and overhead positions.
  • Limitless thicknesses.
  • For those welding special metals, you must acquire the corresponding New York State Department of Transportation Field Welder certificate.
  • Must use A36 base metal.
  • Must use thicknesses of 1 inch to ⅛ inch.

Step #3: Background Check

After all of that, you have to go through a background check. You will need to submit your paperwork to the Licensing and Exams Unit.

You’ll need the following documents:

  • DPL1 Form
  • Certification card from one of the exam sets we talked about
  • Visual Acuity Test Form
  • LIC62 Form
  • Child Support Certification Form
  • Driver’s License (or photo ID)
  • Birth certificate
  • Social Security Card
  • Marriage Certificate
  • Proof of Residence

Step #4: Getting Your License Card

After the department has decided whether or not you meet the criteria, you will get a letter telling you what to do to obtain your license. 

Is Welding a Good Career?

Is welding a good career choice? In a word, yes! It gives you a fantastic opportunity to somewhat easily find a secure job in almost any industry. Of course, you have to make sure that you follow all the safety standards and best practices to avoid accidents and injuries but overall, it will be fulfilling.

Additionally, choosing welding as a career path gives you so many options. From being your own boss to teaching and more, every day is different. You will never be bored, that’s for sure.

Oh, did we mention it is also seriously in demand? No? Well, it really is and that is not going to change anytime soon! Essentially, as long as there is metal, there will be a job for a welder.

Related reading: How To Start & Grow a Welding Business In 11 Steps

Aside from all of that (and the fantastically large salary), you don’t have to sit behind a desk from 9 to 5 every day. You will be out there, in the thick of it, getting your hands dirty, literally building the infrastructure that allows humans to thrive.

What more could you want out of a career?

Is Welding a Stressful Job?

The first thing to remember here is that stress is an umbrella (and largely subjective) term. The worries a CEO of a million-dollar company has will be significantly different from the things that keep a welder up at night. Not to mention that it truly depends on what type of welding you are doing.

While corporate moguls will be dealing with large investments and trying not to start a snowball effect of wrong-doings, they are probably not going to have burns and retina damage if they don’t do it properly. But you, as a welder, may do.

You have to be accurate and confident with your welds, while keeping safety in mind at all times. It’s safe to say that this can cause a boatload of stress. One false move and you could be facing serious injuries.

Plus, you will constantly be working to tight deadlines. Whether you are working through the night or in adverse weather conditions, these timelines have to be stuck to. So yes, you will have to deal with stress but it can be overcome with a little practice.

You might want to check out our other articles about welding for more information.

Here are some of my favorite tools & equipment´s

Thank you for reading this article. I hope it helps you find the most recent and accurate information for your welding project. Here are some tools that I use daily and hope you´ll also find helpful.

There are affiliate links, so if you do decide to use any of them, I´ll earn a small commission. But in all honesty, these are the exact tools that I use and recommend to everyone, even my own family. (NO CRAP)

To see all my of most up-to-date recommendations, check out this resource that I made for you!

Best Overall

+ Great Products & Services

+ Approved

+ Save Thousands of Dollars

David Harper

David is the Co-Founder and Senior Editor at David's an experienced fitter and tuner/welder who's passionate about helping others develop in life through new skills and opportunities.

Recent Posts

error: Content is protected !!